Airwheel self-balancing electric unicycle scooter was designed and originated in China. The Airwheel brand unicycle intelligent system balances you automatically. The on-board gyroscopes and inertial monitoring make corrections to the motor speed and power hundreds of times per second.
Airwheel is the latest high-tech means of transport adopting aerospace attitude control theory, fuzzy algorithm, and gyroscope system to achieve balance by forward and backward leaning. Users can control the vehicle to go forward, accelerate, decelerate, brake or others, by inclining forward or leaning backwards. The left and right balance is similar to the technique of riding a bicycle – achieved through slightly slanting left or right.
Airwheel features as a green product that can be easily carried around on bus or subway, making it a helpful tool in commuting
Auxiliary Belt x1
Extended Nozzle x1
Training Wheel x2
Place Airwheel vertically on the ground and turn on power. Power and Battery Level LED will illuminate and buzzer will beep, then the vehicle is ready to use. If AirWheel tilts either forward or backwards after power is switched on, then wait until it reverts to upright position before riding.
Note: A: Plugging to power source after maintenance may cause sparks. This is normal. Do not be panic. B. Do not open the side with the lights or the aluminum panel. Opening any part other than instructed in this manual will forfeit your warranty rights
A four-bar LED indicator is used to indicate battery level. All four will light up when power level is more than 85% and will go off one by one as the level decreases. Please check power level before usage to ensure there is enough power for the return trip. You may want to charge it every time after use. When power level is lower than 10%, all four lights will flicker and the buzzer will sound off. The front part of the treadle will lower itself to force you to decelerate and eventually stop. Please do not restart when this occurs to avoid any accidents. Sustained range will decrease during winter. This is because the battery performance decreases quickly in cold conditions. In -15℃, for example, battery performance is only about half in comparison to that in room temperature.To prevent injuries caused by speed, AirWheel comes with a speed control design. When speed exceeds 10km/h, the front part of the treadle will rise slowly; when the speed exceeds 16km/h, the treadle will rise to a 10° angle, to prevent you from inclining forward to further accelerate. As the speed decreases, the angle of the treadle will also lower itself. NOTE: When the speed is about to reach its limit, please do not incline forward anymore to force acceleration to prevent injuries.
When AirWheel tilts sideways more than a 45° angle, for example when AirWheel falls, the control system will activate side-tilt protection. The machine will stop running immediately to prevent injuries. The buzzer will sound off a long buzz and the LED will flicker when this is activated. To deactivate this, turn the power off, then restart.Plug in the power source after inserting the charger plug, or else the charger will not activate. This can also prevent potential risks, to ensure a safer charge. Airwheel provides a high-power charger. During normal conditions, only 45 mins is needed to be fully charged, 30 mins allows 80% charged. The red light on the charger indicates charging, green indicates charging complete. If not in urgent need, please wait until charging complete before unplugging, because after charging, the protection circuit will perform power flow equilibrium.The water resistance level of AirWheel is IP 56, allowing it to pass through water of no deeper than 10 mm. It can be used in light rain, but do not steep the vehicle in water or take long rides in heavy rain.
Please store Airwheel in a dry place. If left unused, recharge the battery every two months to maintain longevity of the battery.Use the extension inflation tube to inflate the tire. Without the tube, you will not be able to pump air into the wheel.To repair or change the inner or outer tires, open the side of the cover without the indicator lights. First, unscrew the 14 screws on the sides, then the six at the center. Now the side cover can be opened. Give care when disassembling the connecting terminal. No not force disconnection.